Olight M3X Triton Special Ops, CREE XLamp XM-L LED, 700 Lumens

The M3X is a high-powered flashlight using CREE’s newest XLamp XM-L LED. A smooth reflector over 2 inches in diameter gives amazing throw with up to 700 lumens out the front of the light. It has two brightness levels (High and Low) and an instant strobe operated by an easy user-interface. Click the tailcap switch for on, or use a half-press for momentary output. The High, Low, and Strobe settings are select using the head. Loosen for Low, tighten for High. Activate strobe in either High or Low by performing a tighten-loosen-tighten or loosen-tighten-loosen within 2 seconds. The light can be configured in either a more compact 3 x CR123A / 2 x 18500 version or for maximum runtime the included extender can be used with 2 x Li-Ion 18650’s. Its simple operation, amazing throw, and competitive price make this light a winner! Great for: security, law enforcement, search and rescue, hunting, emergency, or any application where an intense spot light is needed.

Features:

• High performance CREE XLamp XM-L LED
• Maximum output of 700 lumens out the front
• Maximum runtime of 15 hours
• Reverse polarity protection (in case batteries inserted incorrectly)
• Two digitally controlled constant-brightness levels and a bright strobe
• Instant access to strobe
• Rugged aluminum body with scratch-resistant, indestructible Type-III hard anodizing
• Anti-slip knurling for excellent grip
• Forward Tactical Click Switch for easy on/off and momentary function
• Crenellated front bezel and tailcap for close-quarter combat
• Multi-scattering slot design to protect LED and electric components
• Intelligent temperature control system to prevent overheating
• Water resistant to IPX-8 standards
• Smooth reflector providing perfect beam with exceptional throw
• Shatter and scratch resistant anti-reflective coated ultra clear lens
• Easy user interface – change modes by rotating the head
• Removable stainless steel clip
• Mountable on firearms using a compatible weapon mount

Specifications:

• Battery Options in 3-cell Configuration (Batteries not included):
  • 3 x Lithium CR123A / Li-Ion RCR123A
  • 2 x 18500 Protected Li-Ion
• Battery Options in 4 Cell Configuration (with included extender tube) (Batteries not included):
  • 4 x Lithium CR123A (Note: 4 x RCR123A’s CANNOT be used with extender)
  • 2 x 18650 Protected Li-Ion
• Dimensions: 2.48” (63mm) (Diameter) x 8.31” (211mm) (Length)
• Body Diameter: 0.98” (25mm)
• Weight: 9.38oz (266g) (excluding batteries)
• Output (Runtime):
  • High 700 Lumens (1.2 hours)
  • Low 60 Lumens (15 hours)
  • Strobe 10Hz (2.4 hours)

Included Accessories:

• 1 x Battery magazine (for use with 3 x CR123A batteries)
• 1 x Holster
• 1 x Extender tube (for use with 2 x Li-Ion 18650)
• 1 x Operator’s Manual
• 2 x Spare O-rings

~

The M3X is a high-powered flashlight using CREE’s newest XLamp XM-L LED. A smooth reflector over 2 inches in diameter gives amazing throw with up to 700 lumens out the front of the light. It has two brightness levels (High and Low) and an instant strobe operated by an easy user-interface. Click the tailcap switch for on, or use a half-press for momentary output. The High, Low, and Strobe settings are select using the head. Loosen for Low, tighten for High. Activate strobe in either High or Low by performing a tighten-loosen-tighten or loosen-tighten-loosen within 2 seconds. The light can be configured in either a more compact 3 x CR123A / 2 x 18500 version or for maximum runtime the included extender can be used with 2 x Li-Ion 18650’s. Its simple operation, amazing throw, and competitive price make this light a winner! Great for: security, law enforcement, search and rescue, hunting, emergency, or any application where an intense spot light is needed.

Features:

High performance CREE XLamp XM-L LED

Maximum output of 700 lumens out the front

Maximum runtime of 15 hours

Reverse polarity protection (in case batteries inserted incorrectly)

Two digitally controlled constant-brightness levels and a bright strobe

Instant access to strobe

Rugged aluminum body with scratch-resistant, indestructible Type-III hard anodizing

Anti-slip knurling for excellent grip

Forward Tactical Click Switch for easy on/off and momentary function

Crenellated front bezel and tailcap for close-quarter combat

Multi-scattering slot design to protect LED and electric components

Intelligent temperature control system to prevent overheating

Water resistant to IPX-8 standards

Smooth reflector providing perfect beam with exceptional throw

Shatter and scratch resistant anti-reflective coated ultra clear lens

Easy user interface – change modes by rotating the head

Removable stainless steel clip

Mountable on firearms using a compatible weapon mount

Specifications:

Battery Options in 3-cell Configuration (Batteries not included):

3 x Lithium CR123A / Li-Ion RCR123A

2 x 18500 Protected Li-Ion

Battery Options in 4 Cell Configuration (with included extender tube) (Batteries not included):

4 x Lithium CR123A (Note: 4 x RCR123A’s CANNOT be used with extender)

2 x 18650 Protected Li-Ion

Dimensions: 2.48” (63mm) (Diameter) x 8.31” (211mm) (Length)

Body Diameter: 0.98” (25mm)

Weight: 9.38oz (266g) (excluding batteries)

Output (Runtime):

High 700 Lumens (1.2 hours)

Low 60 Lumens (15 hours)

Strobe 10Hz (2.4 hours)

Included Accessories:

 

1 x Battery magazine (for use with 3 x CR123A batteries)

1 x Holster

1 x Extender tube (for use with 2 x Li-Ion 18650)

1 x Operator’s Manual

2 x Spare O-rings